Nov 03, 2020
2394
FAQs
The Wi-Fi name (SSID) and Wi-Fi Password is on the label inside the back cover of the device.
A. Locate the Power button.
1) Press the Power button on the mobile hotspot until all four indicators momentarily flash blue.
2) Wait for the Network and Wi-Fi Indicators to come on, one at a time.
3) When the Network and Wi-Fi icons light up blue, the Wi-Fi connection is enabled.
1. Access http://mobile.hotspot or http://192.168.0.1.
2. Click Settings in the navigation area.
3. Select the Wi-Fi Settings tab.
4. Enter a new name in the Network Name (SSID) field.
5. Click the enable or disable the checkbox for Broadcast Network Name to enable or disable
broadcasting the hotspot’s Network Name (SSID).
6. Click Apply to save your changes.
2. Click Settings in the navigation area.
3. Select the Wi-Fi Settings tab.
4. Enter a new name in the Network Name (SSID) field.
5. Click the enable or disable the checkbox for Broadcast Network Name to enable or disable
broadcasting the hotspot’s Network Name (SSID).
6. Click Apply to save your changes.
1. Access http://mobile.hotspot or http://192.168.0.1.
2. Click Settings in the navigation area.
3. Select the Wi-Fi Settings tab.
4. Select WPA2-PSK for the Security Mode.
5. Enter a new password in the Password field.
6. Click Apply to save your changes.
2. Click Settings in the navigation area.
3. Select the Wi-Fi Settings tab.
4. Select WPA2-PSK for the Security Mode.
5. Enter a new password in the Password field.
6. Click Apply to save your changes.
Yes, Updating to the latest firmware version will ensure your device stays secure and you can use the newest features.
1. Access http://mobile.hotspot or http://192.168.0.1.
2. Within the Web User Interface, go to Settings > Device Settings > Software Updates. Click the
Check for the Update button to check if there is any new software version available.
3. If an update is available, a window will pop up to request you to confirm the update.
4. Click Yes to update.
2. Within the Web User Interface, go to Settings > Device Settings > Software Updates. Click the
Check for the Update button to check if there is any new software version available.
3. If an update is available, a window will pop up to request you to confirm the update.
4. Click Yes to update.
Note: Do not remove the battery during software updating. This may cause the software update to fail.
For more information, please visit brickHousesecurity.com and select the support tab.
For more information, please visit brickHousesecurity.com and select the support tab.
Attached below is the User Manual for this device. For more information, please visit brickhousesecurity.com and select the support tab.