You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Hidden Cameras > WiFi Cameras > 1080P PTZ WiFi Network IP Camera Manual and FAQs (Speed4S)
1080P PTZ WiFi Network IP Camera Manual and FAQs (Speed4S)
print icon

Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. 

Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and it must be deleted by the App.

Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.

Q: Why doesn't the device identify the SD card?
A: It is recommended to plug-in the SD card after a power cut. Confirm whether the SD card is available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.

Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened. 


Please see below for full instructions in the attached copy of the Manual for this device.

Feedback
0 out of 0 found this helpful

Attachments

Speed_4_Manual.pdf
scroll to top icon